|
S-2000 series transducer system are designed for non-contacting
vibration and displacement measurements in the following applications:
· Shaft vibration monitoring and analysis
· Axial (thrust) position measurements
· Ramp differential expansion measurements on steam turbines
· Rod position or rod drop measurements on reciprocating compressors
· Tachometer and zero speed measurements
· Phase reference signals
Features:
The tip of the probe is molded with the latest PPS engineering plastic molds, and featured by high strength, high
temperature (220oC) resistance, corrosion resistance, and high reliability.
The tip of the high temperature probe is made of microcrystalline glass, which is resistance to the high temperature of
450 oC, and can endure the high temperature of the combustion gas and the steam.
The magnetic field interference resisting capability of these eddy transducers has been significantly improved, and they
can be applied in the generators and other equipment that produces strong magnetic field;
The coaxial cable and extension coaxial cable for probe signal output are cables with broad temperature range (-55 oC ~200 oC).
S2100-series transducers (For position, case / differential expansion...)
Operating Temperature:
Probe and extension cable at -30 oC ~120 oC, and conditioner at -30 oC ~80 oC (in the relatively humidity of 95%) shall work over a long period of time.
Technical Specifications:
Under the conditions of room temperature of 22 oC, material 40CrMoA of the tested object, power supply of -24V, and load of 10KΩ, the system shall meet the following requirements:
n Frequency response DC~500Hz
n Interchangeable deviation +5% (including linearity and sensitivity)
n
|
Probe Diameter (mm) |
Linear Range (mm) |
Linearity |
Sensitivity |
Sensitivity Accuracy |
|
Ø 18 |
1.15~7.15 |
+1.3% |
2.0v / mm |
+4.0% |
|
Ø 22 |
1.20~11.20 |
+1.4% |
0.8v / mm |
+4.0% |
|
Ø 25 |
1.25~13.75 |
+1.5% |
0.8v / mm |
+4.0% |
|
Ø 35 |
1.30~21.30 |
+1.5% |
0.8v / mm |
+4.0% |
|
Ø 50 |
2.50~27.50 |
+2.0% |
0.4v / mm |
+4.0% |
|
Ø 60 |
2.00~52.00 |
+2.0% |
0.2v / mm |
+4.0% |
Note: Output ripple <10mV
n Temperature sensivity of linearity and sensitivity:
(probe at 0 oC ~100 oC, conditioner at 0 oC ~70 oC, tested in the middle of the full range):
|
Probe Diameter (mm) |
Ø 18 |
Ø 22 |
Ø 25 |
Ø 35 |
Ø 50 |
Ø 60 |
|
Temp. sensivity of sensitivity |
+0.10%/ oC |
+0.10%/ oC |
+0.12%/ oC |
+0.12%/ oC |
+0.12%/ oC |
+0.15%/ oC |
S2200-series tranducer
(For vibration and displacement measurement... Conform to API670 Standard of American Petroleum Institute)
Operating Temperature:
Probe at -20 oC ~180 oC, extension cable at -30 oC ~120 oC, and conditioner at -30 oC ~100 oC (in the relatively humidity of 95%) shall work over a long period of time.
Technical Specifications:
Under the conditions of room temperature of 22 oC, material 40CrMoA of the tested object, power supply of -24V, and load of 10KΩ, the system shall meet the following requirements:
n Frequency response DC~10kHz
n Interchangeable deviation +5% (including linearity and sensitivity)
n
|
Probe Diameter (mm) |
Linear Range (mm) |
Linearity |
Sensitivity |
Sensitivity Accuracy |
|
Ø 5 |
0.25~1.25 |
+1.0% |
8.0v / mm |
+4.0% |
|
Ø 8 |
0.40~2.40 |
+1.0% |
8.0v / mm |
+4.0% |
|
Ø 11 |
1.00~5.00 |
+1.0% |
4.0v / mm |
+4.0% |
|
Ø 14 |
1.10~6.10 |
+1.2% |
3.0v / mm |
+4.0% |
Note: output ripple <5mV
n Temperature sensivity of linearity and sensitivity: (probe at -20 oC ~180 oC, conditioner at -20 oC ~80 oC, tested in the middle of the full range):
|
Probe Diameter (mm) |
Temp.sensivity of linearity |
Temp.sensivity of sensitivity |
|
Ø 5 |
+3.0% |
+0.10%/ oC |
|
Ø 8 |
+3.0% |
+0.10%/ oC |
|
Ø 11 |
+3.0% |
+0.10%/ oC |
|
Ø 14 |
+4.0% |
+0.10%/ oC |
S2900-series integral transducer (For vibration and displacement)
Technical specifications:
l Frequency response: 0~5KHz (-1.5dB)
l Measuring range: 2mm
l Sensitivity (+5% accuracy): +2.5V/mm
l Weight: 120g
l Working temperature: -20 oC ~ 80 oC
l Maximun cable length: 300m
4-core cable: +15Vdc, -15Vdc, OUT, COM
Compatibility relation between S2200-series and others manufacturers:
| |
|
Specification |
Probe Dia. /
Meas. Range |
Sendig |
Bently |
Philips |
Shenck |
|
S2200 Series |
3300 Series |
|
English screw 1/4-28UNF-2A no armor |
Ø 5 / 1mm |
S220521 |
330171 |
6422/10 |
SD-051/2 |
|
English screw 1/4-28UNF-2A armored |
Ø5 / 1mm |
S220522 |
330172 |
6422/11 |
|
|
Metric screw M6 x 0.5 no armor |
Ø5 / 1mm |
S220507 |
|
6422/00 |
SD-051/1 |
|
Metric screw M6 x 0.5 armored |
Ø5 / 1mm |
S220508 |
|
6422/01 |
|
|
Metric screw M8 x 1.0 no armor |
Ø5 / 1mm |
S220503 |
330173 |
|
SD-051/7 |
|
Metric screw M8 x 1.0 armored |
Ø5 / 1mm |
S220504 |
330174 |
|
|
|
Reverse English screw 3/8-24UNF-2A |
Ø5 / 1mm |
S220525 |
330205 |
|
|
|
Reverse English screw M10 x 1.0 |
Ø5 / 1mm |
S220506 |
330206 |
|
|
|
English screw 3/8-24UNF-2A no armor |
Ø8 / 2mm |
S220821 |
330101 |
6423/10 |
|
|
English screw 3/8-24UNF-2A armored |
Ø8 / 2mm |
S220822 |
330102 |
6423/11 |
SD-052/4 |
|
Metric screw M10 x 1.0 no armor |
Ø8 / 2mm |
S220803 |
330103 |
6423/00 |
|
|
Metric screw M10 x 1.0 armored |
Ø8 / 2mm |
S220804 |
330104 |
6423/01 |
SD-052/3 |
|
Reverse English screw 3/8-24UNF-2A |
Ø8 / 2mm |
S220825 |
330105 |
|
|
|
Reverse Metric screw M10 x 1.0 |
Ø8 / 2mm |
S220806 |
330106 |
|
|
|
English screw 1/2-20UNF-2A no armor |
Ø11 /4mm |
S221121 |
|
|
|
|
English screw 1/2-20UNF-2A armored |
Ø11 /4mm |
S221122 |
|
|
|
|
Metric screw M14 x 1.5 no armor |
Ø11 /4mm |
S221103 |
|
|
|
|
Metric screw M14 x 1.5 armored |
Ø11 /4mm |
S221104 |
|
|
|
|
Metric screw M16 x 1.0 no armor |
Ø11 /4mm |
S221108 |
|
|
|
|
Metric screw M16 x 1.0 armored |
Ø11 /4mm |
S221109 |
|
|
|
|
Metric screw M18 x 1.5 no armor |
Ø11 /4mm |
S221106 |
|
|
|
|
Metric screw M18 x 1.5 armored |
Ø11 /4mm |
S221107 |
|
6424/00 |
|
|
Reverse English screw 3/8-24UNF-2A |
Ø11 /4mm |
S221125 |
|
6424/01 |
|
|
English screw 5/8-18 no armor |
Ø14 /5mm |
S221421 |
|
|
|
|
English screw 5/8 -18 armored |
Ø14 /5mm |
S221422 |
|
|
|
|
Metric screw M16 x 1.5 no armor |
Ø14 /5mm |
S221403 |
|
|
|
|
Metric screw M16 x 1.5 armored |
Ø14 /5mm |
S221404 |
|
|
|
|
Metric screw M16 x 1.5 armored |
Ø14 /5mm |
S221404 |
|
|
|
|
|
